Quad Band 20dBm GSM DCS 3G LTE Mobile Phone Signal Booster
A cell phone signal booster (also known as amplifier or repeater) is made up of three main elements - exterior antenna, amplifier, and interior antenna. They form a wireless system to boost cellular reception. This 4 bands mobile signal booster can boost GSM DCS 3G 4G signals.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. High linear design, ALC function design, low interference to BTS.
4. Support any cellular devices (voice & data & video)
5. Wideband signal booster, or customize selective band booster.
6. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G, etc
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.
3.ODM/OEM service is available.
Specifications:
| Working Frequency (GSM900) |
Uplink |
890-915MHz |
| Downlink |
935-960MHz |
| Working Frequency (DCS1800) |
Uplink |
1710-1785MHz |
| Downlink |
1805-1880MHz |
| Working Frequency (WCDMA2100) |
Uplink |
1920-1980MHz |
| Downlink |
2110-2170MHz |
| Working Frequency (LTE2600) |
Uplink |
2500-2570MHz |
| Downlink |
2620-2690MHz |
| Gain |
65dB |
| Power |
20dBm |
| Manual Gain Control |
31dB / 1dB Step |
| Automatic Gain Control |
>20dB |
| Voltage Standing Wave Ratio (VSWR) |
< 1.5 |
| Noise Figure |
≤ 6dB |
| In-Band Ripple |
≤ 6dB |
| Frequency Error |
≤ 0.05ppm |
| Spurious Emission |
Within working band |
≤ -15dBm/30kHz |
Out of working band
(Δf > 2.5MHz) |
9kHz~1GHz: ≤ -36dBm/30kHz |
| 1GHz~12.75GHz: ≤ -30dBm/30kHz |
| Return lose |
≤- 10dB |
| Time Delay |
≤ 1.5μSec |
| I/O Impedance |
50Ω |
| RF Connector |
N-Type (Female) |
| Temperature Range |
Operation: -10ºC~55ºC |
| Relative Humidity Range |
≤ 95% (non condensing) |
| Power Supply (customizable) |
AC100-240V,50/60Hz; DC9V/3A |
| Power Consumption |
≤200W |
| Dimensions(mm) |
268mm*58mm*189mm |
| Weight(kg) |
1.5Kg |
Product Tags:
|
|
GSM DCS Network Signal Booster 20dBm 3G LTE 2600mhz Quad Band ALC Images
|
